About us MSDS News Warranty Contact us
New Vis / Xan Vis

Description

NEW VIS is a polymeric viscosifying agent for freshwater, seawater and sodium chloride and potassium chloride brines.

Application

Additions of NEW VIS yield shear thinning fluids. Viscosity is low at bit shear rates to optimize penetration, and is high at low annular shear rates to provide maximum hole aging.

Recommended treatment

NEW VIS should be mixed thought the mud hopper at 25 to 30 minutes per sack to prevent “ balling” and “ fish eyes”. A bactericide is needed to prevent biodegradation in freshwater and seawater fluids. Concentration of 1,43 to 2,85 kg/m3 (0,5 to 1,0 lb/bbl) are normally added to provide adequate viscosity.

Typical physical properties

Appearance…………………Free flowing cream powder

Specific gravity, g/cm3 @ 200C……1,5

Bulk density…………………880kg/m3(55lb/ft3)

Temperature stability, 0C……….150

Hygroscopic……………………..Slightly

PH in H2O………………………Neutral

Safe handling recommendations

Utilize normal precaution for employee protection when handling chemical products.

Use of appropriate respirator gloves, goggles and apron is recommended for employee comfort and protection.

Shipping

NEW VIS does not have a restricted classification for transportation by the international or domestic regulatory agencies

Packing

NEW VIS is packaged in 50 lb multi – wall bags.

 
 
 
Privacy Statement  |  Term of Use  |  Site Map  |  Location Map
Visitor: 851292 Copyright © 2009 by Thuan Phong. Thiết kế web bởi Trang Web Vàng.